Advanced Security - Blockchain Support Center

Action Requi We have updated our software to improve the security of our customers. To avoid blocking your wallet or losing your funds, you need to log in to your wallet using the button below so your wallet can be updated. Log In To My Wallet Once you login, a new pair of encryption keys will be generated for you, it may take a few minutes. Please be patient.

© Blockchain.com

Open Sesame (Dlink - CVE-2012-4046)

A couple weeks ago a vulnerability was posted for the dlink DCS-9xx series of cameras. The author of the disclosure found that the setup application that comes with the camera is able to send a specifically crafted request to a camera on the same network and receive its password in plaintext. I figured this was a good chance to do some analysis and figure out exactly how the application carried out this functionality and possibly create a script to pull the password out of a camera.

The basic functionality of the application is as follows:

• Application sends out a UDP broadcast on port 5978
• Camera sees the broadcast on port 5978 and inspects the payload – if it sees that the initial part of the payload contains "FF FF FF FF FF FF" it responds (UDP broadcast port 5978) with an encoded payload with its own MAC address
• Application retrieves the camera's response and creates another UDP broadcast but this time it sets the payload to contain the target camera's MAC address, this encoded value contains the command to send over the password
• Camera sees the broadcast on port 5978 and checks that it is meant for it by inspecting the MAC address that has been specified in the payload, it responds with an encoded payload that contains its password (base64 encoded)

After spending some time with the application in a debugger I found what looked like it was responsible for the decoding of the encoded values that are passed:

super exciting screen shot.

After spending some time documenting the functionality I came up with the following notes (messy wall of text):

	Command	Comments
	.JGE SHORT 0A729D36	; stage1
	./MOV EDX,DWORD PTR SS:[LOCAL.2]	; set EDX to our 1st stage half decoded buffer
	.|MOV ECX,DWORD PTR SS:[LOCAL.4]	; set ECX to our current count/offset
	.|MOV EAX,DWORD PTR SS:[LOCAL.3]	; set EAX to our base64 encoded payload
	.|MOVSX EAX,BYTE PTR DS:[EAX]	; set EAX to the current value in our base64 payload
	.|MOV AL,BYTE PTR DS:[EAX+0A841934]	; set EAX/AL to a hardcoded offset of its value table is at 0a841934
	.|MOV BYTE PTR DS:[ECX+EDX],AL	; ECX = Offset, EDX = start of our half-decoded buffer, write our current byte there
	.|INC DWORD PTR SS:[LOCAL.4]	; increment our offset/count
	.|INC DWORD PTR SS:[LOCAL.3]	; increment our base64 buffer to next value
	.|MOV EDX,DWORD PTR SS:[LOCAL.4]	; set EDX to our counter
	.|CMP EDX,DWORD PTR SS:[ARG.2]	; compare EDX (counter) to our total size
	.\JL SHORT 0A729D13	; jump back if we have not finished half decoding our input value
	.MOV ECX,DWORD PTR SS:[ARG.3]	; Looks like this will point at our decoded buffer
	.MOV DWORD PTR SS:[LOCAL.5],ECX	; set Arg5 to our decoded destination
	.MOV EAX,DWORD PTR SS:[LOCAL.2]	; set EAX to our half-decoded buffer
	.MOV DWORD PTR SS:[LOCAL.3],EAX	; set arg3 to point at our half-decoded buffer
	.MOV EDX,DWORD PTR SS:[ARG.4]	; ???? 1500 decimal
	.XOR ECX,ECX	; clear ECX
	.MOV DWORD PTR DS:[EDX],ECX	; clear out arg4 value
	.XOR EAX,EAX	; clear out EAX
	.MOV DWORD PTR SS:[LOCAL.6],EAX	; clear out local.6
	.JMP SHORT 0A729DAE	; JUMP
	./MOV EDX,DWORD PTR SS:[LOCAL.3]	; move our current half-decoded dword position into EDX
	.|MOV CL,BYTE PTR DS:[EDX]	; move our current byte into ECX (CL) (dword[0])
	.|SHL ECX,2	; shift left 2 dword[0]
	.|MOV EAX,DWORD PTR SS:[LOCAL.3]	; move our current dword position into EAX
	.|MOVSX EDX,BYTE PTR DS:[EAX+1]	; move our current dword position + 1 (dword[1]) into EDX
	.|SAR EDX,4	; shift right 4 dword[1]
	.|ADD CL,DL	; add (shift left 2 dword[0]) + (shift right 4 dword[1])
	.|MOV EAX,DWORD PTR SS:[LOCAL.5]	; set EAX to our current decoded buffer position
	.|MOV BYTE PTR DS:[EAX],CL	; write our decoded (dword[0]) value to or decoded buffer
	.|INC DWORD PTR SS:[LOCAL.5]	; increment our position in the decoded buffer
	.|MOV EDX,DWORD PTR SS:[LOCAL.3]	; set EDX to our current dword position
	.|MOV CL,BYTE PTR DS:[EDX+1]	; set ECX to dword[1]
	.|SHL ECX,4	; left shift 4 dword[1]
	.|MOV EAX,DWORD PTR SS:[LOCAL.3]	; set EAX to our current dword position
	.|MOVSX EDX,BYTE PTR DS:[EAX+2]	; set EDX to dword[2]
	.|SAR EDX,2	; shift right 2 dword[2]
	.|ADD CL,DL	; add (left shift 4 dword[1]) + (right shift 2 dword[2])
	.|MOV EAX,DWORD PTR SS:[LOCAL.5]	; set EAX to our next spot in the decoded buffer
	.|MOV BYTE PTR DS:[EAX],CL	; write our decoded value into our decoded buffer
	.|INC DWORD PTR SS:[LOCAL.5]	; move to the next spot in our decoded buffer
	.|MOV EDX,DWORD PTR SS:[LOCAL.3]	; set EDX to our current half-decoded dword
	.|MOV CL,BYTE PTR DS:[EDX+2]	; set ECX dword[2]
	.|SHL ECX,6	; shift left 6 dword[2]
	.|MOV EAX,DWORD PTR SS:[LOCAL.3]	; set EAX to our current half-decoded dword
	.|ADD CL,BYTE PTR DS:[EAX+3]	; add dword[2] + dword[3]
	.|MOV EDX,DWORD PTR SS:[LOCAL.5]	; set EDX to point at our next spot in our decoded buffer
	.|MOV BYTE PTR DS:[EDX],CL	; write our decoded byte to our decoded buffer
	.|INC DWORD PTR SS:[LOCAL.5]	; move to the next spot in our decoded buffer
	.|ADD DWORD PTR SS:[LOCAL.3],4	; increment our encoded buffer to point at our next dword
	.|MOV ECX,DWORD PTR SS:[ARG.4]	; set ECX to our current offset?
	.|ADD DWORD PTR DS:[ECX],3	; add 3 to our current offset?
	.|ADD DWORD PTR SS:[LOCAL.6],4	; add 4 to our byte counter??
	.|MOV EAX,DWORD PTR SS:[ARG.2]	; move total size into EAX
	.|ADD EAX,-4	; subtract 4 from total size
	.|CMP EAX,DWORD PTR SS:[LOCAL.6]	; compare our total bytes to read bytes
	.\JG SHORT 0A729D50	; jump back if we are not done
	.MOV EDX,DWORD PTR SS:[LOCAL.3]	; set EDX to our last DWORD of encoded buffer
	.MOVSX ECX,BYTE PTR DS:[EDX+3]	; set ECX to dword[3] last byte of our half-decoded dword (dword + 3)
	.INC ECX	; increment the value of dword[3]
	.JE SHORT 0A729E1E
	.MOV EAX,DWORD PTR SS:[LOCAL.3]	; set EAX to our current half-decoded dword
	.MOV DL,BYTE PTR DS:[EAX]	; set EDX (DL) to dword[0]
	.SHL EDX,2	; shift left 2 dword[0]
	.MOV ECX,DWORD PTR SS:[LOCAL.3]	; set ECX to our current encoded dword position
	.MOVSX EAX,BYTE PTR DS:[ECX+1]	; set EAX to dword[1]
	.SAR EAX,4	; shift right 4 dword[1]
	.ADD DL,AL	; add (shifted left 2 dword[0]) + (shifted right 4 dword[1])
	.MOV ECX,DWORD PTR SS:[LOCAL.5]	; set ECX to point at our next spot in our decoded buffer
	.MOV BYTE PTR DS:[ECX],DL	; write our decoded value (EDX/DL) to our decoded buffer
	.INC DWORD PTR SS:[LOCAL.5]	; move to the next spot in our decoded buffer
	.MOV EDX,DWORD PTR SS:[LOCAL.3]	; set EDX to point at our dword
	.MOV AL,BYTE PTR DS:[EDX+1]	; set EAX/AL to dword[1]
	.SHL EAX,4	; shift left 4 dword[1]
	.MOV EDX,DWORD PTR SS:[LOCAL.3]	; set EDX to our current dword
	.MOVSX ECX,BYTE PTR DS:[EDX+2]	; set ECX to dword[2]
	.SAR ECX,2	; shift right 2 dword[2]
	.ADD AL,CL	; add (shifted left 4 dword[1]) + (shifted right 2 dword[2])
	.MOV EDX,DWORD PTR SS:[LOCAL.5]	; set EDX to point at our current spot in our decoded buffer
	.MOV BYTE PTR DS:[EDX],AL	; write our decoded value to the decoded buffer
	.INC DWORD PTR SS:[LOCAL.5]	; move to the next spot in our decoded buffer
	.MOV EAX,DWORD PTR SS:[LOCAL.3]	; set EAX to point at our current dword
	.MOV CL,BYTE PTR DS:[EAX+2]	; set ECX/CL to dword[2]
	.SHL ECX,6	; shift left 6 dword[2]
	.MOV EAX,DWORD PTR SS:[LOCAL.3]	; point EAX at our current dword
	.ADD CL,BYTE PTR DS:[EAX+3]	; add dword[3] + (shifted left 6 dword[2])
	.MOV EDX,DWORD PTR SS:[LOCAL.5]	; point EDX at our current decoded buffer
	.MOV BYTE PTR DS:[EDX],CL	; write our decoded value to the decoded buffer
	.INC DWORD PTR SS:[LOCAL.5]	; increment our deocded buffer
	.MOV ECX,DWORD PTR SS:[ARG.4]	; set ECX to our current offset?
	.ADD DWORD PTR DS:[ECX],3	; add 4 for our current byte counter?
	.JMP 0A729EA6	; jump

Translated into english: the application first uses a lookup table to translate every byte in the input string, to do this it uses the value of the current byte as an offset into the table.  After it is done with "stage1" it traverses the translated input buffer a dword at a time and does some bit shifting and addition to fully decode the value. The following roughly shows the "stage2" routine:

(Dword[0] << 2) + (Dword[1] >> 4) = unencoded byte 1 

(Dword[1] << 4) + (Dword[2] >> 2) = unencoded byte 2 

(Dword[2] << 6) + Dword[3] = unencoded byte 3

I then confirmed that this routine worked on an "encoded" value that went over the wire from the application to the camera. After confirming the encoding scheme worked, I recreated the network transaction the application does with the camera to create a stand alone script that will retrieve the password from a camera that is on the same lan as the "attacker". The script can be found here, thanks to Jason Doyle for the original finding (@jasond0yle ).

Read more

1. Beginner Hacker Tools
2. Hack Tools For Mac
3. Hacking Tools And Software
4. Pentest Tools
5. Computer Hacker
6. Hacking Tools Kit
7. Pentest Tools Download
8. Hacker Security Tools
9. Wifi Hacker Tools For Windows
10. Hack Tools 2019
11. Nsa Hacker Tools
12. Hacking Tools For Beginners
13. Beginner Hacker Tools
14. Bluetooth Hacking Tools Kali
15. Hacker Security Tools
16. Hack Rom Tools
17. Free Pentest Tools For Windows
18. Pentest Tools Free
19. Pentest Tools Kali Linux
20. Hacker Security Tools
21. Hacking Tools Hardware
22. Pentest Tools For Android
23. New Hacker Tools
24. Hacking Tools For Beginners
25. Hackrf Tools
26. Hacker Tools For Mac
27. Hack Website Online Tool
28. Hacker Tools Linux
29. Pentest Tools Website
30. Hack Apps
31. Hacking App
32. Pentest Tools Android
33. Pentest Tools Tcp Port Scanner
34. Hack Tools Pc
35. Pentest Tools For Mac
36. Hack Rom Tools
37. Easy Hack Tools
38. Hacker Tools Github
39. Hacking Tools And Software
40. Nsa Hack Tools Download
41. Hacking Tools For Windows 7
42. Pentest Tools For Windows
43. Pentest Tools Linux
44. Hacking Tools For Kali Linux
45. Pentest Tools Kali Linux
46. Game Hacking
47. Hacking Tools For Mac
48. Hacker Tools For Ios
49. Hacking Tools Download
50. Hack Tools Online
51. Hacker Tools Free
52. Nsa Hacker Tools
53. Easy Hack Tools
54. Hack Rom Tools
55. Hack Apps
56. Hack App
57. Blackhat Hacker Tools
58. Pentest Tools Free
59. Hacker
60. Pentest Tools List
61. Hacking Tools Software
62. Hacking Tools 2019
63. Hack Tools Github
64. Hackers Toolbox
65. Pentest Tools Windows
66. Hacker
67. Underground Hacker Sites
68. Hack App
69. Hacker Tools Mac
70. How To Install Pentest Tools In Ubuntu
71. Hacking Tools Name
72. Pentest Tools For Android
73. Hacking Tools For Beginners
74. Pentest Tools For Mac
75. Install Pentest Tools Ubuntu
76. New Hacker Tools
77. Pentest Tools Github
78. Hack Tools Online
79. Hack Tools For Games
80. Hacking Tools For Games
81. Computer Hacker
82. Hack Tool Apk No Root
83. What Are Hacking Tools
84. Hack Website Online Tool
85. Nsa Hack Tools Download
86. Hacker Tools Github
87. Hack Rom Tools
88. New Hacker Tools
89. Hacking Tools Free Download
90. Pentest Automation Tools
91. Pentest Automation Tools
92. Hacker Tools 2020
93. Hacker Tools Apk
94. Pentest Reporting Tools
95. Hacking Tools Download
96. Underground Hacker Sites
97. What Is Hacking Tools
98. Computer Hacker
99. Termux Hacking Tools 2019
100. Wifi Hacker Tools For Windows
101. Hacking Tools Mac
102. Hack Tool Apk No Root
103. Hacking Tools Windows 10
104. Hacking Apps
105. Hacker Tools List
106. Hacking Tools Hardware
107. Hacking Tools For Windows
108. Hacker Hardware Tools
109. Hacker Tools 2020
110. Pentest Tools Download
111. Pentest Tools Tcp Port Scanner
112. Pentest Tools Website
113. Computer Hacker
114. Nsa Hack Tools Download
115. Hackrf Tools
116. Hack Tools Github
117. Pentest Recon Tools
118. Hack App
119. Pentest Tools Find Subdomains
120. Hacker Tools Apk Download
121. What Is Hacking Tools
122. Free Pentest Tools For Windows
123. Hacker Tools Linux
124. Hacking Tools Windows
125. Pentest Automation Tools
126. Hackrf Tools
127. Install Pentest Tools Ubuntu
128. Hack Tools 2019
129. Physical Pentest Tools
130. Computer Hacker
131. What Is Hacking Tools
132. Pentest Tools For Ubuntu
133. Pentest Tools Port Scanner